Membrane Toray 8 Inch TM720D-400, Made in KSA
High-Rejection Brackish Water Reverse Osmosis Membrane
Element with Enhanced Chemical Tolerance
Toray's reverse osmosis membrane technology applies decades
of R&D and precision automated manufacturing under ISO 9001
for consistency in product quality. State-of-the-art cross-linked
fully aromatic polyamide composite membranes produce highquality
permeate and robust membrane chemistry for improved
performance and longer membrane life.
Operating Information:
- Please consult the latest Toray technical bulletin, design guidelines, computer design program, or call an application specialist for the recommended design range. Not strictly following the operating limits stated in this bulletin will void and nullify the Limited Warranty.
2. All RO elements are wet tested treated with a 1 percent by weight sodium bisulfited storage solution. Afterward, the RO elements are vacuum packed in oxygen barrier bags or treated with a tested feed water solution, and then vacuum sealed in oxygen barrier bags with deoxidant inside. Toray recommends flushing Toray RO elements for 30 to 60 minutes once every two days with sufficient quality flushing water, such as pre-treated feed water, to prevent biological growth during system shutdown. Please refer to the Toray RO Handling Manual for suggested flushing water quality.
3. The presence of free chlorine and other oxidizing agents under certain conditions, such as heavy metals that act as oxidation catalysts in the feed water, will cause unexpected oxidation of the membrane. Toray strongly recommends removing these oxidizing agents contained in feed water before operating the RO system.
4. Permeate from the first hour of operation shall be discarded.
5. The customer is fully responsible for the effects of chemicals that are incompatible with the elements. Their use will void the element Limited Warranty. 6. Maximum operating pressure will vary depending on feed temperature. Please ask for detailed information from Toray if needed.