Global Consumer Bureau المستهلك حول العالمGlobal Consumer Bureau المستهلك حول العالمGlobal Consumer Bureau المستهلك حول العالم

DOW Filmtec membrane 8 Inch SW30HRLE-400, USA

SR 3,500.00

السعر شامل الضريبة. التوصيل والشحن تحسب عند إتمام عملية الشراء.

DOW FILMTEC™ SW30HRLE–400 ElementHigh Rejection, Seawater Reverse Osmosis Element Description: Dow Water & Process Solutions offers various premium seawater reverse osmosis (RO)elements designed to reduce capital and operation cost of seawater RO systems.DOW FILMTEC™ Elements combine premium membrane performance with automatedprecision fabrication which takes system performance to exceptional levels.DOW... اقرأ أكثر

غير متوفّر

نقبل الدفع عند الإستلام

codmadavisamaster
التوصيل الى الدمام والخبر و الظهران والقطيف والجبيل وراس تنورة وماحولهم:
 المنطقة: المجموع الفرعي للطلب: تكلفة التوصيل:
الدمام و القطيف وماحولهم أقل من SR 200 SR 35
  SR 200 وأعلى مجانا
الخبر و الظهران والعزيزية وماحولهم أقل من SR 500 SR 59
  SR 500 وأعلى مجانا
الجبيل والجبيل الصناعية وماحولهم أقل من SR 1000 SR 145
  SR 1000 وأعلى مجانا
راس تنورة وماحولها أقل من SR 350 SR 49
  SR 350 وأعلى مجانا

حاليا لانقوم بالتوصيل والتركيب في المناطق خارج التغطية للخدمة الموضحه أعلاه.

DOW FILMTEC™ SW30HRLE–400 Element
High Rejection, Seawater Reverse Osmosis Element


Description:

Dow Water & Process Solutions offers various premium seawater reverse osmosis (RO)
elements designed to reduce capital and operation cost of seawater RO systems.
DOW FILMTEC™ Elements combine premium membrane performance with automated
precision fabrication which takes system performance to exceptional levels.
DOW FILMTEC™ SW30HRLE–400 Elements offer a combination of high rejection and low
energy requirements to allow lower total costs with medium- and high-salinity feedwater.


Benefits of the DOW FILMTEC SW30HRLE–400 element include:
- Helps systems to be designed and operated to optimize operating cost through lower
energy consumption or to optimize capital cost through higher productivity at lower
operating fluxes.
- High NaCl and boron rejection to help meet World Health Organization (WHO) and
other drinking water standards.
- Effective use in permeate staged seawater desalination systems without impairing the
performance of the downstream stage.
- High performance over the operating lifetime without the use of oxidative posttreatments.
This is one reason DOW FILMTEC elements are more durable and may
be cleaned more effectively over a wider pH range (1 – 13) than other RO elements.
- Automated, precision fabrication with a greater number of shorter membrane leaves
reducing the effect of overall fouling and maximizing element efficiency, helping to
lower your cost of operation.

Product Type Spiral-wound element with polyamide thin–film composite membrane.

Product Specifications: 
1. The above values are normalized to the following conditions: 32,000 ppm NaCl, 5 ppm boron, 800 psi (5.5 MPa),77°F (25°C), pH 8, 8% recovery.
2. Permeate flows for individual elements may vary ± 15%.
3. Minimum Salt Rejection is 99.65%.
4. Stabilized salt rejection is generally achieved within 24 – 48 hours of continuous use; depending upon feedwater characteristics and operating conditions.
5. Product specifications may vary slightly as improvements are implemented.
6. Active area guaranteed ± 5%. Active area as stated by Dow Water & Process Solutions is not comparable to the nominal membrane area figure often stated by some element suppliers. Measurement method described in Form No. 609-00434.

الاحد,الاثنين,الثلاثاء,الاربعاء,الخميس,الجمعة,السبت
يناير ، فبراير ، مارس ، أبريل ، مايو ، يونيو ، يوليو ، أغسطس ، سبتمبر ، أكتوبر ، نوفمبر ، ديسمبر
لا تتوفر عناصر كافية. بقي [max] فقط.
أضف لقائمة الأمنياتعرض قائمة الأمنياتإزالة قائمة الأمنيات
عربة التسوق
كتابة تعليمات خاصة في الطلبتعديل التعليمات الخاصة في الطلب
أضف قسيمة

أضف قسيمة

سيعمل رمز القسيمة على صفحة إتمام عملية الشراء